Mellott's VRSony HMZ-T1 in VFX1 Shell
Check out the Sony HMZ-T1 in a VFX1 shell!!
Welcome to the new Mellott’s VR Page
Welcome to the new Mellott’s VR Page. The original page was started in 1998 on Geocities. I’m excited to start updating the page again with new VR information. I’ve used a lot of new gear over…
Trimersion Video Headset with wired video/audio
Recently I got my hands on some Trimersion HMD’s. Thanks to Bob Ladrach for that!! I was really intrigued by the gun controller on this HMD. After using it I was extremely impressed but a bit…
Modified: Simple Power Glove Interface for IBM PC
Here are the schmetics for wiring the Power glove to the PC. Use +5 volt supply off of the keyboard port. Here are the pinouts on a parallel port and the Nintendo light Gun port.
PowerGlove FAQ
Forward Mattel PowerGlove FAQ version 0.3, [date]. Written by jet@well.sf.ca.us (j. eric townsend). Significant help and input from: Randy Shedden (randysh@microsoft.com), Linda Jacobson (lindaj@well.sf.ca.us),lots of people on the WELL, sci.virtual-worlds, and of course, the glove-list. The…
Material List
Transmitter: 1- ATmega163 40 pin DIP IC 1-UHF TRX 433 MHz (Radio Shack UHF Module) 1-7805 V Regulator 1- 4Mhz Crystal 1- Red LED 1- Green LED 1- Double Row Pin Header (Firmware Upgrades) 2- 0.01uF…
3DOF Tracker
This is my first 3DOF Tracker project. I’m continually working on it to try to improve the performance. It has come out quite nicely so far. This first design uses a tri-axis magnetic sensor along with…
VR Gun USB Build
Material needed: Erazor MP5 Light Gun. http://www.gocybershop.ca/product_details.asp?ID=410 Ultra Cordless USB Gyromouse. www.gyration.com Radio Shack 7x5x3 Enclosure Part # 270-1807 Radio Shack Pushbuttons Part # 275-609 Standard PS2 Keyboard 25ft DB25 M/M Serial Cable DB25 socket…
Resume
1130 4th St. apt 321 Santa Rosa, CA 95404 (707) 542-6031 klmellott@hotmail.com Kevin Mellott Skills Associate Degree of Occupational Studies in Computer/Electronics C.E.T Certified FCC GROL Certified A+ Certified Certified Fiber Optic Technician-FOA Work Experience Agilent…